Payment & Shipping Terms:
|Thickness:||1.2mm 2.0mm And Etc||Diameter:||4inch To 50inch|
|Surface:||Mill Finish||Temper:||O, H22 Etc|
Alloy: 3000 seriers
Temper: O, H22, H14, H24, H16, H18, H32, H34 and Etc
Diameter: 4inch to 50inch
Quality control: We have the certificate of ISO and SGS and we have professional QC Dpat
The detail speciafication of the above products are all can customized by clients
Henan Hobe Metal Material is a major manufacturer and supplier of aluminum circle based in China Alloy: 1000series,3000series.
Pure Aluminum Circle, like Alloy 1050, 1060, 1070, 1100 and Alloy Aluminum Circle, like Alloy 3003. Both hot treated and non-heat treated alloy can be used for aluminum
Aluminum Ingot/Master Alloys --- Aluminum Melting Furnace - --- Aluminum Slab --- Hot Rolling (Direct Cast) Or Cold Rolling (Cold Cast) – Punching – Annealing Furnace -- Final Inspection – Packing --- Delivery
|Thickness for circles (mm)||0.71 _ 6.35||for 0.71 to 1.4 +/-0.08|
|for 1.41 to 2.5 +0.1, -0.13|
|for 2.51 to 4.0 +/-0.13|
|for 4.01 to 5.00 +/-0.15|
|for 5.01 to 6.35 +/-0.20|
|Thickness for ovals (mm)||1.75 _ 3.00||for 1.75 to 2.5 +0.1, -0.13|
|for 2.51 to 3.00 +/-0.13|
|Diameter (mm)||102 _ 1250||(a) sheared circles +2, -0|
|(b) punched circles +0.5, -0|
|Earing||< 5% for ' O' temper|
< 9% for H12, H14, H16, H18
|Specification||Name: 3000 series aluminum sheet|
|Alloy: 3003, 3004, 3005, 3105 etc.|
|Temper: O, H12, H22, H32, H14, H24, H26, H18 etc.|
|Width: Up to 1800mm|
|Length: Up to 6000mm|
|Surface treatment: mill finished, anodized, embossed, PVC coated|
|Feature||Machinability: It is readily machined and is considered as having good machinability for the aluminum alloys,.|
|Forming: It is readily formed by either conventional cold working or hot working.|
|Welding: It is readily accomplished by means of conventional welding methods.|
|Heat Treatment: It is a non-heat treatable alloy.|
|Forging: It may be hot forged in the range of 950 F to 500 F.|
|Hot Working: The hot working range (as for forging) is 950 F to 500 F. In that range the alloy is easily hot worked.|
|Cold Working: It is readily cold worked by all conventional methods.|
|Annealing: Annealing, during or following cold working, is done at 775 F, allowing adequate time for thorough heating, followed by air cooling.|
|Hardening: Hardens as a result of cold working only.|
|Alloy||Chemical Component %≤|
Chemical equipment, ductwork, and in general sheet metal work, cooking utensils, pressure vessels, builder's hardware, eyelet stock, ice cube trays, garage doors, awning slats, refrigerator panels, gas lines, gasoline tanks, heat exchangers, drawn and spun parts, and storage tanks etc.
1. Wide range of selection on circle’s size including customized shape and size.
2. Excellent surface quality for lighting reflectors.
3. Excellent deep drawing and spanning quality.
4. We provide heavy guage circles with thickness up to 6mm thick which is deal for cookware.
5. Anodized quality and deep drawing quality which is suitable for cookware as well.
6. Well- protected packing.